petr
Newbie Boot Camper
Posts: 2
|
Post by petr on Dec 28, 2020 0:53:19 GMT
I tried blue drivers on iMac 2020 with Radeon 5700 XT. I went through the installation process exactly how it is shown in the video (including Safe Mode). For a brief moment, I saw the display with correct resolution and in Device Manager, there was Radeon 5700 XT. But it flickered again and the screen went black. Every few seconds there was for a very brief moment in the lower left part field with "Type here to search", but not in the correct size (it was bigger than it should, so the resolution was not correct). I tried to open the Start menu using a keyboard and it showed something - on the left and bottom edge of the screen there was something like a border of that Start menu. But it was there for 2 seconds at max and then the computer rebooted on its own. And from this time whenever I try to boot into Windows it automatically reboots during booting... OK, so I removed blue drivers in Safe mode and reinstalled them again with same result. Than I tried to install red drivers. They ended up installed and working! Yes, I saw cloned display, but I disabled cloning in Radeon SW and set resolution to 2560x1440 (highest available with correct aspect ratio is 3840x2160). Limiting resolution like this is not issue for me as I have Windows only for games. I quickly tried Portal 2 and Quake Champions and both are working without any problems. So tomorrow I will try Immortal Fenyx Rising... |
|
|
|
Post by eisenheim on Dec 28, 2020 12:18:02 GMT
I tried blue drivers on iMac 2020 with Radeon 5700 XT. I went through the installation process exactly how it is shown in the video (including Safe Mode). For a brief moment, I saw the display with correct resolution and in Device Manager, there was Radeon 5700 XT. But it flickered again and the screen went black. Every few seconds there was for a very brief moment in the lower left part field with "Type here to search", but not in the correct size (it was bigger than it should, so the resolution was not correct). I tried to open the Start menu using a keyboard and it showed something - on the left and bottom edge of the screen there was something like a border of that Start menu. But it was there for 2 seconds at max and then the computer rebooted on its own. And from this time whenever I try to boot into Windows it automatically reboots during booting... OK, so I removed blue drivers in Safe mode and reinstalled them again with same result. Than I tried to install red drivers. They ended up installed and working! Yes, I saw cloned display, but I disabled cloning in Radeon SW and set resolution to 2560x1440 (highest available with correct aspect ratio is 3840x2160). Limiting resolution like this is not issue for me as I have Windows only for games. I quickly tried Portal 2 and Quake Champions and both are working without any problems. So tomorrow I will try Immortal Fenyx Rising... Exactly the same issue for me. Blue drivers caused my iMac 5700xt not to boot up properly, I went to red ones with lower resolution and it’s better now. |
|
|
|
Post by sgtpacket on Dec 30, 2020 20:56:03 GMT
So if we don't mind a lower resolution, should we use the Red drivers on a 2020 iMac with 5700 XT?
|
|
|
|
Post by incredulocious on Jan 3, 2021 0:11:05 GMT
Anybody know if it's possible to get AMD ReLive working on a 16" MacBook Pro (5500M), Razer Core X w/Radeon RX 5700? I'd like to try using it for smoother recording during intensive things like running MS Flight Simulator but I haven't even seen the option appear since I was first setting all this up months ago (probably with Aug 2020 or earlier BootCampDrivers). I'm on "Red" December 2020 drivers now but I've tried many different install methods (including "Blue" version) and I still can't get ReLive to show up.
|
|
|
|
Post by .:Hydrogen:. on Jan 5, 2021 1:01:59 GMT
Anybody know if it's possible to get AMD ReLive working on a 16" MacBook Pro (5500M), Razer Core X w/Radeon RX 5700? I'd like to try using it for smoother recording during intensive things like running MS Flight Simulator but I haven't even seen the option appear since I was first setting all this up months ago (probably with Aug 2020 or earlier BootCampDrivers). I'm on "Red" December 2020 drivers now but I've tried many different install methods (including "Blue" version) and I still can't get ReLive to show up. have you tried installing the AMD app SDK that Mat included in his drivers? |
|
marf
Boot Camper
Posts: 23
|
Post by marf on Jan 5, 2021 4:37:53 GMT
I am also still having trouble getting ReLive to work (on Red drivers), and yes, I've installed the AMD SDK. I have a 16' with an i9 and 5500m 8GB
|
|
|
|
Post by mrtgsmith on Jan 6, 2021 6:27:44 GMT
Hey Dude - Does this driver work for the Gigabyte Radeon RX 6800? I have it installed via PCIE slot on the Mac Pro 2019. Running windows 10.
|
|
|
|
Post by .:Hydrogen:. on Jan 7, 2021 5:13:05 GMT
Hey Dude - Does this driver work for the Gigabyte Radeon RX 6800? I have it installed via PCIE slot on the Mac Pro 2019. Running windows 10. According to MAT's release notes, support for the currently released RX 6000 series gpus as an EGPU is supported/released on the newest driver (December 2020). Theoretically, it should work, but always be cautious, since I don't know about mac pro 2019 support for these new gpus. |
|
|
|
Post by incredulocious on Jan 9, 2021 7:40:38 GMT
Anybody know if it's possible to get AMD ReLive working on a 16" MacBook Pro (5500M), Razer Core X w/Radeon RX 5700? I'd like to try using it for smoother recording during intensive things like running MS Flight Simulator but I haven't even seen the option appear since I was first setting all this up months ago (probably with Aug 2020 or earlier BootCampDrivers). I'm on "Red" December 2020 drivers now but I've tried many different install methods (including "Blue" version) and I still can't get ReLive to show up. have you tried installing the AMD app SDK that Mat included in his drivers? Yes, I forgot to mention that. I did install the AMD SDK as well. It had no effect. Still no ReLive. I see somebody else with a 16” 2019 MacBook Pro (5500M) says they can’t get ReLive working. Anybody with this machine get it going? |
|
|
|
Post by IceMan on Jan 9, 2021 11:27:49 GMT
have you tried installing the AMD app SDK that Mat included in his drivers? Yes, I forgot to mention that. I did install the AMD SDK as well. It had no effect. Still no ReLive. I see somebody else with a 16” 2019 MacBook Pro (5500M) says they can’t get ReLive working. Anybody with this machine get it going? i have same problem with relive but no clue why.. but mat said somewhere if i remember depends of model of GPU could also bug from AMD self |
|
|
|
Post by .:Hydrogen:. on Jan 10, 2021 6:05:35 GMT
egpu.io/forums/pc-setup/amd-xconnect-please-share-your-experiences-and-questions/according to an AMD rep in this site, "Unfortunately ReLive is not supported on any configurations with Hybrid Graphics and/or XConnect." Xconnect is the EGPU thing so it looks like you're out of luck. I would suggest using OBS and taking a look at this video for recording settings on low-end PCs, and change the settings according to what your personal preferences are.
|
|
marf
Boot Camper
Posts: 23
|
Post by marf on Jan 11, 2021 0:25:29 GMT
egpu.io/forums/pc-setup/amd-xconnect-please-share-your-experiences-and-questions/according to an AMD rep in this site, "Unfortunately ReLive is not supported on any configurations with Hybrid Graphics and/or XConnect." Xconnect is the EGPU thing so it looks like you're out of luck. I would suggest using OBS and taking a look at this video for recording settings on low-end PCs, and change the settings according to what your personal preferences are. Another option, for games, is to use the Xbox GameBar recording. You don't have a lot of options, but I have found it to be very reliable and it won't eat up a lot of performance. |
|
|
|
Post by florexus on Jan 11, 2021 2:16:26 GMT
This is the best version I tried. Aion works as expected. I could resize it, go full screen then back to windowed. Last time, game crashes. Thank you
|
|
|
|
Post by .:Hydrogen:. on Jan 12, 2021 0:55:31 GMT
egpu.io/forums/pc-setup/amd-xconnect-please-share-your-experiences-and-questions/according to an AMD rep in this site, "Unfortunately ReLive is not supported on any configurations with Hybrid Graphics and/or XConnect." Xconnect is the EGPU thing so it looks like you're out of luck. I would suggest using OBS and taking a look at this video for recording settings on low-end PCs, and change the settings according to what your personal preferences are. Another option, for games, is to use the Xbox GameBar recording. You don't have a lot of options, but I have found it to be very reliable and it won't eat up a lot of performance. Xbox game bar is great and convienient, but the only problem I have with it is the atrocious file size differences when you switch between standard and high quality. You can't really specifically change the resolution. It also doesn't work with Vulkan games, like the Vulkan version of Rainbow Six Siege. OBS would probably give better controllability in terms of resolution, capture FPS, and capture bitrate, especially with the wider variety of presets it gives you. |
|
|
|
Post by appleuser on Jan 16, 2021 23:00:23 GMT
I tried this mod for my MacPro 2013 with D700. It installs the software but not the driver. At least when I rebooted it says no driver found when trying to open the AMD Radeon settings. I'm assuming from the installation that this modded version has the new driver but old radeon software which is a cool idea. Unfortunately I had to revert back to the 2019 version.
|
|
