|
|
Post by llirving on Nov 26, 2016 13:17:37 GMT
Hello,
I followed the instructions, restarted into safe mode, uninstalled display drivers, restarted normally and ran the setup, but only get the options to install the AMD install manager and application profiles, the drivers don't get installed. I'd appreciate any help with this!
|
|
|
|
Post by Mat HD on Nov 27, 2016 16:54:10 GMT
Hi there,
I'm working on dedicated drivers for the next version which should fix this.
Thanks for your patience.
|
|
|
|
Post by tdhgoose on Jan 2, 2017 13:48:51 GMT
Hi Mat HD,
I have the same problem in windows 7. He installs the AMD software, but won't install the needed driver. At the device manager He still gives the exclamation mark at the Display driver..
Nice to hear that you're working on the MB Pro 2011 HD6750M drivers. Do you already know when the compatible version for windwos 7 will arrive?
Best regards,
Tiemen
|
|
|
|
Post by Mat HD on Jan 2, 2017 15:03:26 GMT
Hi Mat HD, I have the same problem in windows 7. He installs the AMD software, but won't install the needed driver. At the device manager He still gives the exclamation mark at the Display driver.. Nice to hear that you're working on the MB Pro 2011 HD6750M drivers. Do you already know when the compatible version for windwos 7 will arrive? Best regards, Tiemen Did you try installing the legacy 16.2 beta drivers? The latest Crimson drivers won't work with the older architecture. |
|
|
|
Post by tdhgoose on Jan 2, 2017 16:30:07 GMT
Many tnx for the quick reply. I already tried:
"x64-Crimson-16.2.1-Win10-Win8.1-Win7-Feb27-Legacy-bootcampdrivers"
..and dit it like the READ ME FIRST text file. After the install I get a screen with:
"windows requires a digitally signed driver. Driver ATI Radeon Kernel Mode Driver. A recently installed program tried to install an unsigned driver.... etc. etc. Service amdkmdag. Location: S:\windows\system...\atikmdag.sys.. etc etc.
(I have a prinscreen, but don't know how to upload him)
After reboot I check the Device manager and see at display adapters:
AMD Radeon 6000M and 6700M Series (Bootcamp edition by bootcampdrivers.com) but with a exclamation mark.
Is there someting i'm doing wrong? Or do I need a earlier version?
Hope to hear from you,
best regards,
Tiemen (The Netherlands)
|
|
|
|
Post by Mat HD on Jan 2, 2017 18:17:08 GMT
Interesting. For some reason the installer doesnt recognize the driver is signed. Have you tried going into test mode (see the alternative instructions in the readme file) and see if that works?
|
|
|
|
Post by tdhgoose on Jan 2, 2017 20:33:43 GMT
tnx for the reply again! The last few hours I tried to install the "x64-Crimson-16.2.1-Win10-Win8.1-Win7-Feb27-Legacy-bootcampdrivers" drivers at a clean windows 7 64bit sp1 installation. Because at the previous win7 installaion I got the drivers working with the method of "http://freqnode.com/hack-the-latest-amd-gpu-drivers-into-bootcamp/" This method only works in test mode.. and i want them working in the normal mode.
At the new windows install (as clean as it can get) I still get the same message about the "windows requires a digitally signed driver". After that I removed the drivers with DDU, and installed in test mode. Everything went wel, didn't get the "windows required..." message, but the drivers still aren't installed, the exclamation mark at the device manager is still there...
graphic card Hardware ids:
PCI\VEN_1002&DEV_6741&SUBSYS_00E2106B&REV_00
Got any more suggestions to fix this?
best regards,
Tiemen
|
|
|
|
Post by Mat HD on Jan 3, 2017 4:52:50 GMT
The way I created the driver was very similar to the link you mentioned though I have signed the driver too and others do claim it is working. What error do you get when you open the driver's device manager properties? I will look into this further and get back to you.
|
|
|
|
Post by tdhgoose on Jan 3, 2017 7:30:20 GMT
When I open: Device Manager/ Display adapters/AMD Radeon 6000M and.../Properties/
The Device status says that
"windows cannot verify the digital signature of the drivers required for this device. A hardware of software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from a unknown device. (Code 52)"
|
|
|
|
Post by tdhgoose on Jan 3, 2017 8:50:06 GMT
|
|
|
|
Post by Mat HD on Jan 3, 2017 9:35:13 GMT
I recommend windows 10
|
|
enquire
Newbie Boot Camper
Posts: 1 
|
Post by enquire on Feb 9, 2017 11:09:21 GMT
hey there.
i'm having the same issues on Win7 with iMac and 6750 HD. Unfortunately, now i don't even know how to get back to the bootcamp drivers, as installing them doesn't work either. Left with no drivers at all ;(
|
|
|
|
Post by Mat HD on Feb 9, 2017 11:12:28 GMT
Try downloading the drivers via bootcamp assistant or from the AMD website.
|
|
