|
Post by phant0mninja on Sept 4, 2020 9:06:34 GMT
Hello everyone
I last wrote how I was constantly seeing stuttering on my iMac 27 inch 2020 with the GPU constantly downclocking in bursts which was greatly annoying for gaming. I fixed the stuttering by installing the RED drivers instead but now I have a new problem where after I unclone the display and fix the split screen bug, windows keeps defaulting to 2560 x 2880 which creates this very stretched look on the desktop side and its been bothering me immensely because even after I have defaulted to 4K, the problem reoccurs upon a system reboot. Is there anything I can do about this or am I stuck out of luck?
|
|
|
Post by phant0mninja on Sept 4, 2020 9:25:25 GMT
I found the solution to this problem! www.tenforums.com/graphic-cards/10681-tutorial-how-change-windows-10-default-resolution.htmlI used this guide to help find my regedit values for 4K and applied them to the subfolders marked 00 under the serialised folders in configuration and then rebooted and it worked like a charm! though the 4K was a bit blurry so I changed my graphics setting for AMD for scaling to full panel and unfortuantly that dosen't work after a reboot so I have to manually enable it again on startup. now thats my newest problem haha.
|
|
|
Post by phant0mninja on Sept 4, 2020 11:23:03 GMT
And this should be the finale hopefully, I fixed the incorrect scaling by going into system configuration and enabling base video under boot and now the scaling is properly fixed as it should be. And the changes are kept even at shut down and restarting. I hope this helps for anyone who wants to install RED drivers on their iMac 27 inch because the blue drivers are quite frankly a deficit for me atm.
|
|