Has anyone successfully install 20.2.1 or newer AMDdrivers?
Jul 13, 2020 17:13:43 GMT
konrud likes this
Post by konrud on Jul 13, 2020 17:13:43 GMT
Hello all,
I've got a 27" iMac 2017 5k with a Radeon Pro 570x
Windows 10 2004
Looking to see if anyone with similar specs has been able to successfully install AMD drivers that are 20.2.1 or newer
(I believe AMD is currently on 20.7.1 for this particular card).
I have tried both blue and red versions of each bootcampdriver installation files release after the January edition (I've even tried the March test)
and always end up with a dual screen bug (meaning two duplicated/mirrored displays on my iMac), or when switched to a single display via Windows display settings, the active resolution is extremely wide and flattened and no reso can resolve this.
The installation always go incredibly well until the last few seconds of the AMD installer finishing up Adrenaline.
Here are the steps I've taken:
- DDU cleaned and ran 3x in safe mode before restarting
- running setup with 'factory setting reset' toggled ON
- tried April blue and red, tried March blue and red
- tried manually installing from the INF file without going through the AMD setup .exe
Let me know if anyone has successfully installed the 20.2.1 drivers or newer!
Would greatly appreciate your efforts
PS. This is mostly to solve Vulkan Error on Hyper Scape (requires 20.2 drivers or higher to run. I AM able to run in dual-screen bug with no issues other than the obvious)
Thanks!
I've got a 27" iMac 2017 5k with a Radeon Pro 570x
Windows 10 2004
Looking to see if anyone with similar specs has been able to successfully install AMD drivers that are 20.2.1 or newer
(I believe AMD is currently on 20.7.1 for this particular card).
I have tried both blue and red versions of each bootcampdriver installation files release after the January edition (I've even tried the March test)
and always end up with a dual screen bug (meaning two duplicated/mirrored displays on my iMac), or when switched to a single display via Windows display settings, the active resolution is extremely wide and flattened and no reso can resolve this.
The installation always go incredibly well until the last few seconds of the AMD installer finishing up Adrenaline.
Here are the steps I've taken:
- DDU cleaned and ran 3x in safe mode before restarting
- running setup with 'factory setting reset' toggled ON
- tried April blue and red, tried March blue and red
- tried manually installing from the INF file without going through the AMD setup .exe
Let me know if anyone has successfully installed the 20.2.1 drivers or newer!
Would greatly appreciate your efforts
PS. This is mostly to solve Vulkan Error on Hyper Scape (requires 20.2 drivers or higher to run. I AM able to run in dual-screen bug with no issues other than the obvious)
Thanks!
