markj
Newbie Boot Camper
Posts: 2
|
Post by markj on Feb 17, 2018 23:02:50 GMT
Hi there!
I've usually not had an issue with your drivers supplied, however this time around i've booted into safe mode, used DDU, verified the drivers are gone, and installed the new drivers via the setup. As soon as the card is once again recognised, the screen intermittently disconnects every few seconds, with an error message in the system tray stating the display drivers are not working correctly; this is followed by the machine restarting itself. I've tried redownloading the drivers, clearing the drivers, and reinstalling them.
Any advice would be much appreciated, thanks in advance!
Edit: Sorry i missed the sticky! I'm running a late 2014 5K iMac with a 295X, running on windows 10. I'd attempted to just use the latest release i believe.
|
|
|
Post by Mat HD on Feb 18, 2018 0:09:59 GMT
You have the same card as me. I would make sure you dont have older versions of the driver installed on drive C. Then run DDU twice to be sure. Or try AMD uninstall utility. Should work ok then. Make sure all latest Windows updates are installed. Also with all other drivers up to date with the help from software like Driver Booster 5.
|
|
markj
Newbie Boot Camper
Posts: 2
|
Post by markj on Feb 18, 2018 18:50:36 GMT
Great, i'll give this another try with the additional steps and let you know what the outcome is!
|
|