sergiot
Junior Boot Camper
Posts: 11
|
Post by sergiot on Mar 30, 2021 17:30:59 GMT
Actually it is a drivers problem cause if i remove the driver the game opens up properly ! i tried all the resolutions and open and close the game but nothing happens >.. If it was specifically a driver issue then it would affect every single game from every developer. Mat don't get me wrong the bootcamp drivers are dope .I mean there is a conflict with the amd drivers , my graphics card and these spesific ubisoft games cause the same happened to odysey , immortals and valhalla . P.S. Ac odysey i managed to play it in windowed mode and the boarderless gaming but valhalla and immortals have very poor performance in windowed mode the fps goes from 100 to 10 and it is really buggy . If you can think of a fix regarding windowed mode let me know .
|
|
|
Post by Mat HD on Mar 31, 2021 16:51:01 GMT
Hi! After several crashes I found out about bootcampdrivers.com and installed Blue Feb 2021 edition. Now I did the update to March 2021 and my Bootcamp Win 10 crashes at the spinning dots every single time. I followed all the instructions in your video but it wouldn't boot. I went into safe mode, DDU then install but windows still crashes at the dots. Tried March red and blue then Feb red and blue with the DDU procedure and nothing works, not even the Feb blue I previously had. What am I doing wrong?
Try installing stock drivers and see if the problem is still there, then reinstall feb blue edition over them if its working.
|
|
|
Post by bluevast on Apr 3, 2021 23:22:16 GMT
I have the 580 and red drivers mirror/splits my screen like I have 2 displays even in display settings it says I have 2 monitors and I don't. I set it use 1 but it stretches' the resolution out bad. Any fix for this? The blue driver did stretch my screen also but no split with a restart it fixed it but upon screen sleep it did it again. I reinstalled the blue as red is a no go for now. Blue seems to be working at the moment.
|
|
|
Post by IceMan on Apr 4, 2021 13:12:15 GMT
I have the 580 and red drivers mirror/splits my screen like I have 2 displays even in display settings it says I have 2 monitors and I don't. I set it use 1 but it stretches' the resolution out bad. Any fix for this? The blue driver did stretch my screen also but no split with a restart it fixed it but upon screen sleep it did it again. I reinstalled the blue as red is a no go for now. Blue seems to be working at the moment. on red drivers you need to disable one screen on your Mac. and then you can put your screen to 4K res on only 1 Monitor. and about the stretch problem after your screen goes to sleep is currently issue on amd side.
|
|
|
Post by bluevast on Apr 4, 2021 17:28:16 GMT
I have the 580 and red drivers mirror/splits my screen like I have 2 displays even in display settings it says I have 2 monitors and I don't. I set it use 1 but it stretches' the resolution out bad. Any fix for this? The blue driver did stretch my screen also but no split with a restart it fixed it but upon screen sleep it did it again. I reinstalled the blue as red is a no go for now. Blue seems to be working at the moment. on red drivers you need to disable one screen on your Mac. and then you can put your screen to 4K res on only 1 Monitor. and about the stretch problem after your screen goes to sleep is currently issue on amd side. Oh I see, well thank you! I will stay with blue for now and try red again next release. I'm just so used to red as it was all I used on my 380x c:
|
|
|
Post by IceMan on Apr 4, 2021 19:06:49 GMT
on red drivers you need to disable one screen on your Mac. and then you can put your screen to 4K res on only 1 Monitor. and about the stretch problem after your screen goes to sleep is currently issue on amd side. Oh I see, well thank you! I will stay with blue for now and try red again next release. I'm just so used to red as it was all I used on my 380x c: on red you get more fps and more options for games then in blue version
|
|
|
Post by macuelef on Apr 11, 2021 16:39:18 GMT
I only wanted to report that the March blue edition on my new iMac 5k (2020) with Radeon Pro 5700 XT did not work - I tried to install it 2x, but the iMac did not start Windows 10 (I did not see a login screen the iMac shut down automatically). So I installed the February version (blue) without any problems.
|
|
|
Post by jinsoku3g on Apr 11, 2021 19:59:02 GMT
Thank you for the update!
I have an iMac Pro 5k, 10 Core Variant, with a Vega 64
Following the included link for install, the video shows a folder with iMac Pro specific instructions, but they not in the video or in the folder. I see install notes under the release in this post - which method of install would be best for a user with my setup? Thanks!
|
|
|
Post by .:Hydrogen:. on Apr 12, 2021 1:41:01 GMT
Thank you for the update! I have an iMac Pro 5k, 10 Core Variant, with a Vega 64 Following the included link for install, the video shows a folder with iMac Pro specific instructions, but they not in the video or in the folder. I see install notes under the release in this post - which method of install would be best for a user with my setup? Thanks! Use the normal method of either directly using setup.exe and upgrading from the stock drivers with factory install selected. If it doesn't work then DDU in safe mode and use the device manager method: Device manager update instructions Begin with stock official Apple BootCamp drivers installed (do not uninstall with DDU or use setup.exe). If you have January edition installed on your MacBook Pro 16" then you can start with these drivers instead. Open 'Device Manager' (search for it in the search box) and select your GPU from the 'Display adaptors' drop-down. Right-click and select "Update driver" . Select "Browse my computer for drivers" (lower option) and navigate to the downloaded drivers folder. Make sure the 'Include subfolders' checkbox is ticked then click 'Next'. The driver will now update with the screen flickering a couple of times. To install the AMD software run "setup.exe" from the downloaded driver folder. Click on "Additional Options". Make sure the "Factory reset" checkbox is NOT ticked (it isn't by default normally), then click install. Restart and enjoy!
|
|
stenapp
Junior Boot Camper
Posts: 18
|
Post by stenapp on Apr 22, 2021 11:25:30 GMT
mat Mat HDWhen do you release an update? Adrenalin 21.4.1 came out recently.
|
|
|
Post by IceMan on Apr 22, 2021 15:07:17 GMT
mat Mat HD When do you release an update? Adrenalin 21.4.1 came out recently. I think he is working on it. So when it becomes ready he will release it
|
|
zans
Newbie Boot Camper
Posts: 5
|
Post by zans on Apr 22, 2021 17:09:53 GMT
I only wanted to report that the March blue edition on my new iMac 5k (2020) with Radeon Pro 5700 XT did not work - I tried to install it 2x, but the iMac did not start Windows 10 (I did not see a login screen the iMac shut down automatically). So I installed the February version (blue) without any problems. I have the same machine and also had trouble with this one. Feb and most previous blue drivers have been working great, so this is not a huge issue for me. More info, if it helps below...
During a regular setup installation after DDU in safe mode, the problem starts right when the new driver is installed: black screen like normal, then a split black/color top/bottom screen that halted things. On reboot, that same screen shows up and stops the startup. Tried another DDU with multiple removes and another install, but same result. Eventually rebooted to safe mode, DDU, & installing Feb driver gets me back to normal.
I also tried the "manual" install of March over the working Feb drivers through the device manager, but ended up with same result on reboot.
|
|
murillo
Newbie Boot Camper
Posts: 2
|
Post by murillo on Apr 22, 2021 18:36:31 GMT
Imac 27 2020, black screen after installing march drivers. First using Feb as base and then i tried a clean installation with the ddu but it still with the same problem. Win10 can start with march drivers. Thanks for your work.
|
|
|
Post by givemetrees on Apr 27, 2021 3:06:04 GMT
Hey Matt! I have the iMac 2020 27" 5700XT and I plan on playing Star Citizen via bootcamp. Which version/month of Drivers would you recommend? I see you mention BLUE on the compatbility page, but should I opt for the JAN/FEB drivers in case the MAR ones aren't as stable? Sorry if this is an annoying question to answer.
|
|
|
Post by .:Hydrogen:. on Apr 27, 2021 6:13:36 GMT
The march drivers are in a weird spot right now. I would suggest that you try using the newest April alpha drivers and if it doesnt work revert to February drivers.
|
|