|
|
Post by kenkissaki on Oct 12, 2019 8:39:48 GMT
hi all its been my 3rd months , and I still can't run my epgu on my bootcamp. Win10 read my egpu but need to free slot to run it here is the message :
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Please help me to finalized this. i still don't know how to make it run,..
|
|
|
|
Post by erutan on Oct 12, 2019 21:44:16 GMT
hi all its been my 3rd months , and I still can't run my epgu on my bootcamp. Win10 read my egpu but need to free slot to run it here is the message : "This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system." Please help me to finalized this. i still don't know how to make it run,.. Check egpu.io/builds/ - chances are someone there posted a build guide similar or the same as your setup. It's not a driver issue. |
|
jekks
Newbie Boot Camper
Posts: 1
|
Post by jekks on Oct 13, 2019 21:43:15 GMT
Had to register to give feedback for this version of the driver.
Both Red and Blue installs nicely. Blue fixes 5k resolution which is nice. But gaming performance, with both drivers at least for me, is much much worse than with the August version.
I'm using MG248 for my gaming and something seems off with the new drivers. Everything shows up as 144Hz but in game the screen acts like it's still 60Hz. Could it be that V-SYNC is enabled even though it's disabled everywhere. FPS is from time to time around 166 but can drop down to 30 in a game like Overwatch. With the August drivers it stays between 140 to 220, iirc.
Using iMac 27" 2018 with 560. Every update has been done as the instructions say, DDU and then fresh install.
|
|
nevo
Newbie Boot Camper
Posts: 2
|
Post by nevo on Oct 14, 2019 15:04:50 GMT
I have a lot of problems!!
First, after restart it showed a cloned display at half of the screen, fixed by disabling it in the amd settings.
second, there is no 5K option !!! only 3840X2160 !
plaese help
note that i have 2019 5k imac with 570X
|
|
|
|
Post by Mat HD on Oct 15, 2019 13:15:45 GMT
I have a lot of problems!! First, after restart it showed a cloned display at half of the screen, fixed by disabling it in the amd settings. second, there is no 5K option !!! only 3840X2160 ! plaese help note that i have 2019 5k imac with 570X So try the blue software version instead if you want 5k. It's a firmware issue with AMD drivers that they haven't fixed. |
|
nevo
Newbie Boot Camper
Posts: 2
|
Post by nevo on Oct 17, 2019 7:02:57 GMT
I have a lot of problems!! First, after restart it showed a cloned display at half of the screen, fixed by disabling it in the amd settings. second, there is no 5K option !!! only 3840X2160 ! plaese help note that i have 2019 5k imac with 570X So try the blue software version instead if you want 5k. It's a firmware issue with AMD drivers that they haven't fixed. But it is meant for 2017 iMacs with pro 560, 570 & 580 not 570X or 580X |
|
|
|
Post by romaha on Oct 20, 2019 16:03:20 GMT
Unfortunately, I'm having the same problem as in last month's release: the screen is split in two with the other half blacked out. When I try to open the Radeon settings it says: "No AMD graphics driver is installed, or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware". 2014 5K iMac, Radeon R9 M290X Same problem on Macbook Pro 2015 m370x. I tried June version - same issue. I even tried v18 I used year ago - still the same. I have just updated my mac os to Cataline, and installed Win10 Bootcamp just after.. May be this is an issue? I tried to restore default drivers, but even official drivers on ATI website for bootcamp wasn't installed properly. Just note, the Win system was completely clean |
|
|
|
Post by gamerpro on Oct 22, 2019 5:48:02 GMT
Where are the Oct drivers Matt HD???
|
|
|
|
Post by kenchand503 on Oct 22, 2019 6:45:57 GMT
Hi all:
Will the blue version added the "Driver Option" back to the driver that we can change the driver mode?
Thanks.
|
|
|
|
Post by gamerpro on Oct 22, 2019 6:52:56 GMT
Hi all: Will the blue version added the "Driver Option" back to the driver that we can change the driver mode? Thanks. What?  |
|
|
|
Post by kenkissaki on Oct 23, 2019 2:58:55 GMT
hi all its been my 3rd months , and I still can't run my epgu on my bootcamp. Win10 read my egpu but need to free slot to run it here is the message : "This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system." Please help me to finalized this. i still don't know how to make it run,.. Check egpu.io/builds/ - chances are someone there posted a build guide similar or the same as your setup. It's not a driver issue. I have difficulty to find some one with the same problem. any one can help for this? please |
|
clover
Junior Boot Camper
Posts: 10
|
Post by clover on Oct 24, 2019 5:36:30 GMT
Hopefully this month there will be also a blue pro software for iMac 5K 2019 (with Vega) because I'm pretty sure the problems that I have been having with all previous red gaming software versions won't be fixed..
|
|
nickt
Newbie Boot Camper
Posts: 1
|
Post by nickt on Oct 24, 2019 16:33:00 GMT
Gudday Mat, Just installed your Sep edition to my iMac Pro, love your work  . Is there a quick fix for the "Radeon Settings and Driver versions do not match. Please try again after updating to the latest version" when trying to open the Radeon settings app?? Cheers! Nick |
|
|
|
Post by erutan on Oct 28, 2019 1:32:26 GMT
Check egpu.io/builds/ - chances are someone there posted a build guide similar or the same as your setup. It's not a driver issue. I have difficulty to find some one with the same problem. any one can help for this? please use search. |
|
phate
Newbie Boot Camper
Posts: 4
|
Post by phate on Oct 31, 2019 6:17:16 GMT
Many thanks to Mat for the Bootcamp-drivers.
Do you know when the October edition will be released?
|
|
. Is there a quick fix for the "Radeon Settings and Driver versions do not match. Please try again after updating to the latest version" when trying to open the Radeon settings app??